My Cart
Mijn Offerte
    • Search
    Advanced Search
    ICOM RoIP Gateway (VE-PG4)
    Add to Wish List Add to Compare

    ICOM RoIP Gateway (VE-PG4)

    € 2.800,91 € 2.800,91
    BRAND:  
    ICOM
    PART #:  
    IC-SAT100M
    WARRANTY:  
    12 MAANDEN
    Stock Status:  
    Op voorraad
    AVAILABILITY:  
    USUALLY SHIPS IN 3-5 BUSINESS DAYS
    Product Code:  
    ICOM-Gateway-VE-PG4
    +
    -
    ICOM RoIP Gateway (VE-PG4)
    The VE-PG4 includes built-in RoIP, SIP gateway, IP router, IP PBX and IP communication terminal controller functions, in one box. In comparison with a similar system combining several devices, installation and administration of the integrated VE-PG4 can be simpler, with less confliction of settings.
     
    Call Recording to a USB Drive
    Call Recording to a USB Drive Incoming/Outgoing calls can be recorded to an external USB device connected to the VE-PG4. Up to four recording settings are programmable. The recording call type is selectable from All, Group, and Individual calls. In addition, the Monitor function transfers the received audio data to an intended device.
     
    Microphone Connection for Base Operation
    Connect HM-241, optional speaker-microphone to the microphone connector on the VE-PG4’s front panel to enable simple base operation. Echo canceller and noise canceller functions are built-in for full-duplex communication with IP advanced radio system, like the IP100H, IP501H or IP501M.
     
    Position and Status Information
    GPS position and status information from the IP501H/IP501M LTE transceivers can be received and transferred to a PC to track the location of the radio users or a user in a vehicle.
    *GPS mapping software is required for GPS data.
     
    Remote Communicator Software, RC-FS10
    The optional RC-FS10 remote communicator creates an IP-based virtual radio on a PC, and can communicate with land mobile radios, LTE radios, and IP communication terminals through the VE-PG4.
     
    SIP Server and IP-PBX Functions
    The built-in simple SIP server enables you to assign IP phone numbers with extension groups. The VE-PG4 can be connected to external SIP server as a client. The following IP-PBX settings are programmable.
     
    Voice Phonebook
    DID (Direct Inward Dialing)
    Used with Panasonic KX-UT and KX-HDV series IP phones
    Call log
    Extension presence
    Phone number routing
    Outside line regulations
    Caller prioritization
    External call limiting
    SIP conferencing
     
    Router Functions with VPN Tunnel
    The VE-PG4 supports LAN, DHCP client, Static IP or PPPoE connections. The VPN function creates a secure IP tunnel connection over the Internet.
     
    Half-width 1U Form Design
    The VE-PG4 occupies only half the width of a 19-inch rack. It can be functionally installed with repeaters, switching hubs and other equipment. LTE (4G)/3G antenna bases with 1.5 m (4.9 ft) of cable are supplied in case antennas need to be relocated for better reception.
     
    Online Firmware Update
    The VE-PG4 supports automatic and online firmware update functions, for remote maintenance. Settings can be saved to a backup file, and easily restored.
     
    Management Features
     
    SYSLOG and SNMP
    Telnet and SSH
    Ping Test and Traceroute Test
    Abnormal condition monitoring, such as LAN port link-down and SIP server registration error
    Administrator password
    SNTP server
    Security slot
     
    More Information
    PRODUCT TYPESATELLITE PTT
    MERKICOM
    DEEL #IC-SAT100M
    NETWERKIRIDIUM
    GEBRUIKSGEBIED100% GLOBAL
    DIENSTIRIDIUM PTT

    Product Questions

    Your Question:
    Related Products
    Customer support